Reference imageElectrodes & Holders
Ag/AgCl Reference Electrode
A silver/silver-chloride reference electrode matched to the electrolyte, filling solution and cell geometry.
SUPER SCIENTIFIC INSTRUMENTS
Electrodes, consumables, research cells, in-situ systems and electrochemical measurement equipment.

GO STRAIGHT TO YOUR REQUIREMENT
Showing 188 products in this field
Relevant catalogs ↗
Reference imageElectrodes & Holders
A silver/silver-chloride reference electrode matched to the electrolyte, filling solution and cell geometry.
Reference imageConsumables & Materials
Carbon cloth substrates for gas-diffusion layers and laboratory electrode development.
Reference imageConsumables & Materials
Carbon paper gas-diffusion substrates selected by grade, thickness, treatment and cut size.
Reference imageConsumables & Materials
CR2032 coin-cell case requirements for laboratory cell assembly, with the required set contents defined.
Brochure photoConsumables & Materials
Custom MEA enquiries combining membrane, electrode layers and the active area required by your laboratory cell.
Reference imageElectrodes & Holders
A glassy carbon working surface for laboratory voltammetry and electrochemical method development.
Range photoConsumables & Materials
D520-series Nafion ionomer dispersion enquiries for laboratory electrode and catalyst-ink formulations.
Range photoConsumables & Materials
Nafion N117 proton-exchange membrane enquiries for laboratory electrochemical cells and membrane research.
Range photoConsumables & Materials
Nafion NR211 membrane enquiries for research assemblies that specify a thin solution-cast PFSA membrane.
Range photoConsumables & Materials
Nafion NR212, also requested as N212, for fuel-cell and electrochemical membrane requirements.
Reference imageConsumables & Materials
Nickel felt for porous-electrode and catalyst-support requirements with a defined material and thickness specification.
Reference imageConsumables & Materials
Porous nickel foam specified by thickness, cut size and pore-structure requirements.
Brochure photoConsumables & Materials
Pt/C catalyst enquiries with the required platinum fraction, carbon support and research quantity.
Reference imageElectrodes & Holders
Platinum wire electrodes for laboratory cell configurations requiring a specified wire diameter, length and connection.
Catalog imageResearch & In-situ Cells
A quick-opening PEEK cell for entry-level three-electrode gas-diffusion experiments.
Catalog imageResearch & In-situ Cells
A three-chamber PEEK gas-diffusion cell with a catalog reaction area of 1 cm².
Catalog imageResearch & In-situ Cells
A window-equipped three-chamber gas-diffusion cell with 7 mm anode-to-cathode spacing.
Catalog imageResearch & In-situ Cells
A window-equipped three-chamber gas-diffusion cell with a shorter 3 mm anode-to-cathode gap.
Reference imageConsumables & Materials
Activated carbon for research projects with a defined grade, physical form and material requirement.
Reference imageConsumables & Materials
Porous aluminium foam specified by thickness, cut size and pore-structure requirements.
Reference imageConsumables & Materials
Aluminium foil specified for laboratory electrode preparation and current-collector development.
Reference imageConsumables & Materials
Aluminium Plate material enquiries for laboratory samples, cell components and current-collector requirements.
Reference imageConsumables & Materials
Aluminium-laminated film for laboratory pouch-cell development and packaging-material requirements.
Range photoResearch & In-situ Cells
Analytical electrochemical cell arrangements with a support stand and the required electrode layout.
Reference imageConsumables & Materials
Anion-exchange membrane requirements for research cells, selected by chemistry, grade and the intended assembly.
Catalog imageResearch & In-situ Cells
Aqueous-Battery In-Situ AFM Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
ATR Heating Crystal Plate for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
A vanadium redox flow battery research cell with a catalog flow-channel area of 50 cm².
Catalog imageResearch & In-situ Cells
A PEEK compression-type battery test cell with an Ag/AgCl reference-electrode connection.
Catalog imageResearch & In-situ Cells
A two-electrode compression-type cell for simulated coin-cell tests using 10, 12 or 16 mm wafers.
Catalog imageResearch & In-situ Cells
A two-electrode battery test cell with optical windows for observing the electrochemical experiment.
Catalog imageResearch & In-situ Cells
A visual battery test cell that adds a reference-electrode port to the B001-3 arrangement.
Catalog imageResearch & In-situ Cells
Button-Cell In-Situ Mass Spectrometry Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
An ECL test cell with a bottom detection channel and a fixed 1 cm² working area for ITO or FTO glass.
Catalog imageResearch & In-situ Cells
A basic in-situ Raman cell with a 37 mm quartz window and a standard 1 cm² working area.
Catalog imageResearch & In-situ Cells
A two-compartment Raman cell with a removable membrane arrangement and a standard 1 cm² working area.
Catalog imageResearch & In-situ Cells
An in-situ Raman cell that adds a cathode gas channel for gas-diffusion electrode measurements.
Catalog imageResearch & In-situ Cells
A gas-diffusion Raman cell with a serpentine gas channel and a standard 1 cm² working area.
Catalog imageResearch & In-situ Cells
A Raman cell for disc working electrodes, with a 25 mm optical window and a standard 5 mm glassy-carbon disc.
Catalog imageResearch & In-situ Cells
A three-compartment Raman cell combining a serpentine gas path with a 45 mm sapphire window.
Catalog imageResearch & In-situ Cells
An in-situ XRD electrochemical cell with a polyimide window and a standard 5 mm glassy-carbon disc electrode.
Catalog imageResearch & In-situ Cells
A membrane conductivity fixture using PEEK and platinum sheets with a two-electrode measurement arrangement.
Catalog imageResearch & In-situ Cells
A membrane conductivity fixture with platinum wires supporting two- and four-electrode measurements.
Catalog imageResearch & In-situ Cells
Research cells for capacitive-deionization studies with a stated electrode geometry and fluid arrangement.
Reference imageConsumables & Materials
Carbon felt substrates for laboratories specifying a porous carbon electrode material.
Reference imageConsumables & Materials
A coated aluminium foil substrate specified by its base material, dimensions and coating requirement.
Reference imageConsumables & Materials
A coated carbon cloth substrate specified by its base material, dimensions and coating requirement.
Reference imageConsumables & Materials
A coated copper foil substrate specified by its base material, dimensions and coating requirement.
Brochure photoConsumables & Materials
Catalyst-coated membranes configured by membrane grade, catalyst layers and the required active area.
Range photoConsumables & Materials
Cation-exchange membranes specified by grade, ionic form, thickness and cell dimensions.
Catalog image
Reference imageConsumables & Materials
Cellulose-based separators selected by grade, thickness and the intended cell chemistry.
Reference imageResearch & In-situ Cells
Laboratory cells and kits for electrochemical coating, paint and corrosion studies with a defined sample area.
Reference imageConsumables & Materials
Coin-cell holders for a specified cell format and electrical or mechanical test interface.
Reference imageConsumables & Materials
Mesh components for coin-cell and laboratory battery assemblies, specified by material and geometry.
Catalog imageResearch & In-situ Cells
Composite ATR Accessories for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Conductive carbon powder for electrode formulations requiring a stated grade and material specification.
Catalog imageMaterials & Reaction Equipment
Continuous High-Flux Joule Heating Platform for laboratory research and application-specific experimental configurations.
Range photoElectrodes & Holders
An electrode holder selected around the copper electrode shape and its exposed portion.
Reference imageConsumables & Materials
Porous copper foam specified by thickness, cut size and pore-structure requirements.
Reference imageConsumables & Materials
Copper foil for laboratory current-collector and thin-metal-substrate requirements.
Reference imageConsumables & Materials
Copper Plate material enquiries for laboratory samples, cell components and current-collector requirements.
Range photoElectrodes & Holders
Copper working electrodes for experiments requiring a specified copper surface and mounting geometry.
Brochure photoResearch & In-situ Cells
Laboratory cells for CO₂ electrochemical-reduction studies, configured around the required electrode and flow arrangement.
Catalog imageResearch & In-situ Cells
Gas-diffusion flow cells with 10 × 10 mm or 20 × 20 mm standard channels and selectable body materials.
Catalog imageResearch & In-situ Cells
Dendrite Observation Optical System for laboratory research and application-specific experimental configurations.
Reference imageElectrodes & Holders
A detachable glassy carbon electrode arrangement for laboratories specifying a removable working surface.
Catalog imageMaterials & Reaction Equipment
Discharge Plasma Joule Heating System for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
A laboratory CDI cell with PMMA protective plates and a catalog electrode spacing below 3 mm.
Catalog imageResearch & In-situ Cells
A CDI cell with a serpentine graphite current collector and a 50 × 50 × 2 mm internal flow channel.
Catalog imageElectrochemical Workstations
A compact workstation for DC electrochemical techniques and battery charge/discharge studies.
Catalog imageResearch & In-situ Cells
Electric-Field Diffuse-Reflectance Cell for laboratory research and application-specific experimental configurations.
Brochure photoConsumables & Materials
Electrocatalyst inks specified for coating electrodes or membranes, with catalyst, binder and quantity defined.
Catalog imageResearch & In-situ Cells
Electrochemical flow cells configured by electrode geometry, flow paths and the required fluid connections.
Catalog imageResearch & In-situ Cells
Electrochemical Mass Spectrometry Cell for laboratory research and application-specific experimental configurations.
Reference imageElectrodes & Holders
Polishing consumables and accessories selected for the material and finish of your working electrodes.
Brochure photoConsumables & Materials
Research electrolyzer hardware selected by cell chemistry, active area and plate or current-collector materials.
Catalog imageMaterials & Reaction Equipment
Externally Assisted Joule Heating Platform for laboratory research and application-specific experimental configurations.
Brochure photoConsumables & Materials
Laboratory fuel-cell hardware configured around an active area, flow-field arrangement and material requirement.
Catalog imageResearch & In-situ Cells
Fuel-Cell In-Situ Raman Test Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Fuel-Cell In-Situ XAFS Test Cell for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Gas-diffusion electrodes specified by substrate, catalyst, active area and metal loading.
Brochure photoConsumables & Materials
Carbon-based gas-diffusion-layer inks specified for microporous-layer and electrode-substrate coating requirements.
Catalog imageMaterials & Reaction Equipment
Gas Mixing System for laboratory research and application-specific experimental configurations.
Brochure photoConsumables & Materials
Glass microfiber laboratory filters selected by grade, dimensions and the requirements of the filtration method.
Reference imageElectrodes & Holders
Gold working electrodes for studies that require a defined metallic electrochemical surface.
Reference imageConsumables & Materials
Graphite powder selected by grade, particle requirements and the intended electrode formulation.
Reference imageElectrodes & Holders
Graphite rod electrodes specified by rod diameter, usable length and the laboratory connection.
Reference imageResearch & In-situ Cells
H-type laboratory electrochemical cells selected by chamber volume, separation and electrode arrangement.
Catalog imageResearch & In-situ Cells
H-Type Infrared Internal-Reflection Cell for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Hard-carbon material enquiries for laboratory electrode and energy-storage research.
Catalog imageResearch & In-situ Cells
Heterogeneous Photocatalytic In-Situ XAFS Cell for laboratory research and application-specific experimental configurations.
Reference imageElectrodes & Holders
Mercury/mercury-oxide reference electrodes specified with the filling electrolyte and laboratory interface.
Reference imageElectrodes & Holders
A mercury/mercurous-sulfate reference electrode selected by filling solution, junction and cell fit.
Catalog imageResearch & In-situ Cells
High- and Low-Temperature Battery Raman Test Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High- and Low-Temperature Battery XAFS Transmission Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High- and Low-Temperature Battery XRD Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High- and Low-Temperature Diffuse-Reflectance Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature Dual-Mode XAFS Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature High-Pressure Diffuse-Reflectance Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature High-Pressure XAFS Reaction Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature In-Situ Raman Reaction Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature In-Situ XRD Reaction Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature Infrared Transmission Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature Photocatalytic XRD Reaction Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
High-Temperature Plasma Diffuse-Reflectance Cell for laboratory research and application-specific experimental configurations.
Range photoElectrodes & Holders
Reference electrode configurations for applications with a stated elevated-temperature requirement.
Catalog imageResearch & In-situ Cells
High-Temperature Stirring H-Type ATR Cell for laboratory research and application-specific experimental configurations.
Catalog imageMaterials & Reaction Equipment
Hot-Press Joule Heating System for laboratory research and application-specific experimental configurations.
Reference imageElectrodes & Holders
Hydrogen-reference arrangements for laboratories requiring a defined reference configuration.
Catalog imageResearch & In-situ Cells
An H-type infrared cell for internal-reflection measurements using a monocrystalline-silicon working substrate.
Catalog imageResearch & In-situ Cells
An external-reflection IR cell with a 10 mm glassy-carbon working electrode and micrometer adjustment.
Catalog imageResearch & In-situ Cells
A titanium-housed infrared reaction cell with two 20 mL chambers and a catalog maximum pressure of 6 MPa.
Catalog imageResearch & In-situ Cells
In-Situ Differential Mass Spectrometry System for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
In-Situ Infrared Diffuse-Reflectance System for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
In-Situ Infrared Electrochemical ATR System for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
In-Situ Infrared External-Reflection Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
In-Situ Infrared Multiple-Reflection Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
In-Situ Infrared Transmission System for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Electrochemical cells configured for in-situ Raman measurements and the required optical arrangement.
Catalog imageResearch & In-situ Cells
In-Situ XRD Electrochemical Reaction Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
A transmission-mode infrared electrochemical cell with a 0.5 mm solution layer and platinum-mesh working electrode.
Catalog imageResearch & In-situ Cells
Infrared–Mass Spectrometry Tandem Cell for laboratory research and application-specific experimental configurations.
Brochure photoConsumables & Materials
Iridium oxide catalyst enquiries with the required grade, purity and laboratory quantity.
Catalog imageMaterials & Reaction Equipment
Joule Heating System for laboratory research and application-specific experimental configurations.
Catalog imageMaterials & Reaction Equipment
Joule-Heated Fixed-Bed Reactor for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Lithium and Sodium Battery UV Electrolyte Test Cell for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Lithium chips for laboratory cell requirements with a defined diameter, thickness and material specification.
Catalog imageResearch & In-situ Cells
Lithium Dendrite Microscopic Observation Cells for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Lithium-Air Battery In-Situ Raman Test Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Lithium-Battery In-Situ Infrared ATR Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Lithium-Battery In-Situ Raman Test Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Lithium-Battery In-Situ XAFS Test Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
Lithium-Battery In-Situ XRD Cell for laboratory research and application-specific experimental configurations.
Catalog imageMaterials & Reaction Equipment
Long-Duration Joule Heating System for laboratory research and application-specific experimental configurations.
Catalog imageBattery Cyclers
Multi-channel charge, discharge and cycle testing for coin-cell research.
Catalog imageResearch & In-situ Cells
Low-Temperature In-Situ XRD Reaction Cell for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Magnesium foil for laboratories specifying a thin metallic research substrate.
Catalog imageResearch & In-situ Cells
Conductivity measurement fixtures configured by sample dimensions, contact geometry and the measurement method.
Catalog imageMaterials & Reaction Equipment
Miniature Fixed-Bed Reactor for laboratory research and application-specific experimental configurations.
Catalog imageMaterials & Reaction Equipment
Molecular Pump and Vacuum System for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Molybdenum foil specified by thickness, dimensions and the required material grade.
Catalog imageMaterials & Reaction Equipment
Multichannel Fixed-Bed Reactor for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Nickel tabs specified by dimensions, thickness and the required cell connection arrangement.
Range photoElectrodes & Holders
Nickel working electrodes for defined-surface laboratory studies and electrode-material development.
Reference imageElectrodes & Holders
Reference electrodes configured for non-aqueous electrochemical measurements and the required solvent system.
Catalog imageResearch & In-situ Cells
Photoelectrocatalytic XRD Reaction Cell for laboratory research and application-specific experimental configurations.
Reference imageResearch & In-situ Cells
Photoelectrochemical cells selected around the optical path and electrode arrangement of the experiment.
Reference imageConsumables & Materials
Platinum black for electrode formulations requiring a specified unsupported platinum catalyst.
Reference imageElectrodes & Holders
Platinum mesh and gauze electrodes selected by sheet size, construction and laboratory cell mounting.
Reference imageElectrodes & Holders
Platinum plate electrodes for experiments requiring a solid electrode geometry and a defined exposed area.
Reference imageElectrodes & Holders
An electrode holder selected around the platinum plate thickness, width and connection point.
Reference imageElectrodes & Holders
A platinum working electrode selected by exposed geometry, holder dimensions and the laboratory measurement.
Reference imageConsumables & Materials
Platinum–ruthenium black catalyst ordered to a stated composition and material specification.
Brochure photoConsumables & Materials
Carbon-supported platinum–ruthenium catalyst for a specified composition and laboratory formulation.
Reference imageConsumables & Materials
PE battery separator requirements selected by grade, thickness and the required laboratory format.
Reference imageConsumables & Materials
PP separator materials for laboratories specifying a particular grade and cell assembly format.
Reference imageConsumables & Materials
Pouch-cell holders defined by the cell envelope, tab arrangement and required test interface.
Catalog imageResearch & In-situ Cells
Pouch-Cell In-Situ Mass Spectrometry Cell for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Trilayer PP–PE–PP separator requirements for laboratory cells, with dimensions and material data specified.
Reference imageConsumables & Materials
PVDF binder requirements for electrode formulations with a stated polymer grade and processing route.
Catalog imageResearch & In-situ Cells
Raman–Mass Spectrometry Tandem Cell for laboratory research and application-specific experimental configurations.
Catalog imageMaterials & Reaction Equipment
Rapid Joule Heating Furnace for laboratory research and application-specific experimental configurations.
Reference imageElectrodes & Holders
A saturated calomel reference electrode ordered with its required junction, body and connection details.
Reference imageConsumables & Materials
SBR binder enquiries for electrode formulations, with the grade and required supply form defined.
Reference imageElectrodes & Holders
An electrode holder selected around the printed strip outline and electrical pad pattern.
Reference imageElectrodes & Holders
Screen-printed electrode formats for sensing and electrochemical research, selected by electrode layout and contact interface.
Catalog imageResearch & In-situ Cells
Solid-State Battery In-Situ AFM Cell for laboratory research and application-specific experimental configurations.
Reference imageResearch & In-situ Cells
Laboratory fixtures for solid-state battery experiments with defined specimen geometry and contact requirements.
Range photoElectrodes & Holders
An electrode holder selected around the stainless steel sample dimensions and the required isolation.
Reference imageConsumables & Materials
Porous stainless steel foam specified by thickness, cut size and pore-structure requirements.
Reference imageConsumables & Materials
Thin stainless steel foil selected by alloy grade, thickness and dimensions.
Range photoElectrodes & Holders
Stainless steel working electrodes specified by alloy grade, exposed area and the laboratory cell interface.
Reference imageConsumables & Materials
Super P conductive-carbon enquiries with the exact grade, quantity and documentation specified by the laboratory.
Catalog imageResearch & In-situ Cells
TEM In-Situ Liquid Cell System for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
T-type laboratory test cells with a third-electrode connection specified for the intended experiment.
Reference imageConsumables & Materials
Tin foil supplied against a defined thickness, size and research-material specification.
Reference imageConsumables & Materials
Porous titanium foam specified by thickness, cut size and pore-structure requirements.
Catalog imageResearch & In-situ Cells
Compression-type laboratory battery cells for a defined two-electrode arrangement, often described as Swagelok-type cells.
Catalog imageResearch & In-situ Cells
A single-chamber X-ray absorption cell for laboratory electrochemical experiments at a synchrotron beamline.
Catalog imageResearch & In-situ Cells
An H-type dual-chamber XAFS cell for experiments requiring separate electrochemical compartments.
Catalog imageResearch & In-situ Cells
The electrode-free XAFS configuration for pure gas-phase reaction measurements.
Catalog imageResearch & In-situ Cells
A gas-diffusion XAFS cell with a Kapton observation window and replaceable chamber arrangement.
Catalog imageResearch & In-situ Cells
XRD Tensile and Compression Sample Stage for laboratory research and application-specific experimental configurations.
Reference imageConsumables & Materials
Zinc foil for zinc-electrode research and thin-metal sample preparation.
Catalog imageResearch & In-situ Cells
Zinc-Air Three-Electrode In-Situ XAFS Cell for laboratory research and application-specific experimental configurations.
Catalog imageResearch & In-situ Cells
An acrylic metal-air battery test cell with gas-circulation support and 30 mL or 50 mL catalog options.
Catalog imageResearch & In-situ Cells
A second acrylic metal-air test-cell configuration with gas circulation and selectable working volume.
Try another keyword or category, or explore the complete product range.
All SSI products →THE RELEVANT DOCUMENTS, TOGETHER
Electrochemistry, Flow & MEA Systems75 pages · PDF catalogView / download →
In-situ Research Systems & Battery Workflows48 pages · PDF catalogView / download →
SSI Company Brochure9 pages · PDF catalogView / download →
Battery Cell-Making Equipment5 pages · PDF catalogView / download →Need the complete collection? View all SSI catalogs →